Home > Product > series > AC Power Supply
IT7800E High Power Programmable AC Power Supply

Adopting advanced SiC technology,ITECH IT7800E 3U high series of programmable AC/DC power supply, with power up to 21kVA, voltage ranges up to 350V L-N. Users are able to increase output power up to more than 1MVA by configuring master-slave parallel. With intuitive LCD touch panel interface, users can be quickly familiar with the unit operation.

IT7800E series is built-in power meter and arbitrary waveform generator, which is able to simulate harmonics and other arbitrary waveform output. Users can choose single phase, three-phase and reverse phase output modes, with programmable output and complete measurements. ITECH IT7800E series is designed for new energy, power electronics,

research institutes etc.

Find a product
Model
Voltage
Current
Power
Resolution
Accuracy
Interface
Size
IT78126E-350-630
350 V
630 A
126 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
27U
inquiry
IT78105E-350-525
350 V
525 A
105 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
27U
inquiry
IT7884E-350-420
350 V
420 A
84 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
27U
inquiry
IT7863E-350-315
350 V
315 A
63 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
15U
inquiry
IT7842E-350-210
350 V
210 A
42 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
6U
inquiry
IT7821E-350-105
350 V
105 A
21 kVA
0.01V/0.01A
<0.1%+0.1%FS /<0.1%+0.2%FS
USB/CAN/LAN/digital I/O port, optional GPIB/analog & RS232
3U
inquiry
Show all
* The above specifications are subject to change without prior notice.
Product Features
Adopt advanced SiC technology
High power density, 3U up to 21kVA
Master-slave parallel with current sharing technology, up to 1MVA, multiple units in parallel work as one
Voltage ranges : 350/700/1050 VL-N*3
Up to 50th harmonic simulation and analysis with built-in IEC61000-3-2/3-12 regulations*1
Output frequency: 16-2400Hz, programmable slew rate setting for changing voltage and frequency
Built-in single/3-phase AC power meter
4 output modes: AC/DC/AC+DC/DC+AC
Choose single phase, three-phase, reverse phase output mode, to simulate 3-phase imbalance, 3-phase harmonics imbalance, 3-phase split phase test, reverse phase sequence tests for 3-phase models
and etc.
Harmonics, inter-harmonics waveform synthesizer
Programmable output impedance
Intuitive touch screen interface
Simulate arbitrary waveform output, support csv. file import
High current crest factor, suitable for inrush current testing*2
Built-in various waveforms
List mode simulates the power supply reproduction function to realize the simulation function of  instantaneous power interruption
Output 0-360 ° start/stop phase angle can be set
Surge/Sag function
Relay CTRL function, to cut off the connection between instrument and DUT
Built-in waveforms compliance with the IEC61000-4-11/ 4-13/4-14/4-28
Built-in USB/CAN/LAN/Digital IO interface, optional GPIB / Analog&RS232
Optional software can help complete the pre-compliance standards test of civil avionics/electrical ships interms of the multi-national safety regulations*1

Support CANopen*1、Modbus、LXI、SCPI communication

*1 Voltage and current harmonic analysis / Voltage harmonic simulation
*2 Maximum CF is up to 6 within peak currnt range




Functions and Advantages

Application



3U/21kVA high power density

With only 3U size, ITECH IT7800E can reach both 21kVA forpower and 350V L-N for voltage. Compared with conven tionalAC source, it saves a lot of space for users.



Master/Slave parallel

ITECH IT7800 series can provide more power by using the master/slave parallel output function, with 64 units in paralleled, to achieve total output power max. 960kVA.
IT7800 comes with synchronous On/Off input and output signals, which ensures the synchronization of paralleling and ensures synchronous current sharing of multiple modules. After paralleling, not only all functions are retained, but there is no loss of accuracy. Make the construction of the power system faster, more flexible, and more economical, whether it is a stand-alone test or ATE system, it can be easily reached.




AC、DC、AC+DC、DC+AC

The IT7800E series has four output modes: AC, DC, AC+DC, DC+AC. It not only provides pure AC/DC output, but also can use AC+DCand DC+AC output modes to realize "AC output plus DC bias" And "DC output waveform with ripple", which cover a wider range of
applications.



Single phase, three phase, reverse phase

The IT7800E series provides multiple output modes such as single-phase, three-phase and reverse phase, which can be selected by the user through the panel menu. By programming ,it can simulate three-phase unbalance, three-phase harmonic unbalance, lack of phase test, phase sequence reverse connection and other tests, which are flexible and cover more applications. At the same time, IT7800E's reverse mode can also provide a high-voltage test solution. Its voltage can be increased to twice and the power remains 2/3. For example, if it is set to 350V, the actual output voltage can reach 700V after the reverse mode is selected.